Home | » Products | » Generator Remote Start Auto Stop Unit | » Generator Remote Start Auto Stop Unit |
Generator Remote Start Auto Stop Unit

Features:
-
Sturdy construction
-
High performance
-
Longer service life
-
Elevated stability
Introduction
The Microcontroller/microprocessor based automatic start cum stop unit is designed to suit the necessary requirements of customer. The unit is suitable for all types of generators.
LED Indication: Generator On, Mains On,Battery, STop, Ignition,Start, Remote
Buttons: Manual Start, Remote Off/On, Mains Off/On, Manual Stop/Reset
Functions
-
Diesel engine can be started manually with wired remote switch after the absence of main supply from a distance of upto 5000 metres.
-
Just a 1mm 3 core wire is required to control the starting and stopping of generator
-
No matter how far the remote is from the main unit and no other cranking relay is required with in the wire.
-
The ignition will switch On automatically when the generator will start.
-
In case the generator stops due to any engine fault the ignition will not switch off
-
So that the fault can be visible.
-
Diesel engine set stops and ignition also switches off automatically if the engine
-
Stops in healthy condition after the resumption of main supply with a delay time of 30 seconds.
-
Facility of stopping the generator after the resumption of all three phases is also available in case of three phases.
-
Generator can be stopped any time either in the absence of mains supply with remote.
Working of Buttons
-
Manual Start push is used to start the generator manually.
-
Mains on switch is used to stop the generator automatically during the presence of mains.
-
Remote Off/On switch is used to control the working of remote.
-
Manual Stop push has 2 types of working.
-
To stop the engine manually when the unit is in manual mode.
-
To reset the unit in case of fail to start condition.
![]() |
SELFGUARD AUTOMATION AND CONTROLS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |